Cast on Strap

The machine is designed for 6-12 volt starter batteries with groups of thickness between 32-120 mm; two automotive batteries are cast simultaneously when groups have a maximum thickness of 56 mm.

The machine consists of 4 working positions linked by a rotary table.

The following operations are performed:

• Manual loading
• Brushing of the lugs and group pre-alignment on racks
• De-oxidizing and heating of lugs
• Immersion welding of groups
• Manual unloading of welded groups

The standard machine is equipped with the following items:

• Rotary table with 4 working position and air-operated up-down movement. The rotation cycle plus up and down movements takes 5-6 seconds. The racks fitted to table are self-adjusting for groups of different thickness.
• The loading station is fitted with an holed bench, connected to the dust exhausting system.
• Lugs brushing device
• De oxidizing and closed circuit air heating unit.
• Lead level control gauge on melting pot, available in gas/electric heating.
• Unloading station with bench having holed surface connected to the dust exhausting system.
• One set of racks for groups of 23-56 mm in thickness.
• Power control panel and programmable controller.